Thursday, 10 September 2009

Instructions for my CRAFT Challenge 16 card.





As promised, here are also the instructions for making this card. About time as well, I guess as it has been a long time since I put any instructions on here.



First of all, start with making the basic springy card. You can find the instructions on how to do this here.




Then print of the backing papers (see post below) and the step-by-step 3D images that are also in the post below.
Further images of this card can be found here and the background and step-by-step 3D images can be found here if you are interested.




Stick the first backing paper onto the square area of the springy card.




It will then look as below.









Make a slit in the top of the card to allow a penny slider system for one of the Ben10 aliens to move in. I have used the flying one.




Next assemble the 3D images with silicone glue or sticky pads, they will then look similar to what is shown below.























Use a penny slider system to attach the flying Ben10 alien to the base card. It should then be similar to that. You could attach some ribbon as I have done to have a handle to move them with.







Next get the other square and make some slits in that to make penny sliders for the other Ben10 aliens. Make sure you do allow enough space for Ben1o to be mounted onto that as well.





Next attach all the aliens to the penny sliders, together with the ribbons. Attach a Happy Birthday sentiment to a rectangular piece of card that is attached to the under surface of one of the penny slider systems, so it will be revealed when the alien is moved. I have used the left hand corner one for this.




Attach Ben10 to the card as well with sticky foampads (I have used 2 to each spot to give more space for the aliens to move underneath) in such a way that the aliens can still move. This bit is quite tricky.




Turn this piece of card over and put sticky foam pads to the back in such a way that the penny sliders can move freely, there is sufficient space for the bookmark to rest (use this one as a guide by putting it in place when applying the foampads) and the flying alien will still be able to move freely as well when the card is put together.




Done!! That was quite some job!




But I hope you agree it was worth the result.




Here are some of the views of the card again as it is when fully assembled.





Thank you for looking, all comments are very welcome and much appreciated as always.




Love,




Jo.


The promised 3D images used for CRAFT Challenge 16 card.

Hello everyone,

As promised I will now also upload the 3D images and backgrounds I edited and or created for my Ben10 card for challenge 16 at CRAFT Challenge this week. I searched for several free Ben10 images, printed them several times and cut them out for 3D effect.

The images below are 10x10cm backgrounds to fit on the springy card.





















Here is Ben10 himself as a 3D image:




And here are some of the Ben10 aliens as 3D images.












The first 2 sheets (Ben1o and the one on the right) are on A4 sheets, the 2 last ones are on A5 sheets.












Feel free to use these or any other of my 3D images for personal use, but please do not sell them as your own. The images are all free downloads from official Ben10 websites, edited by myself to fit the springy card and also to form 3D images.

The last one here is an A4 sheet with both 10x10 papers and the bookmark I made to go with the card. Just cut them out and use a white strip underneath to personalise with the name of the birthday boy or girl for an extra present.



The instructions for this card can be found here and further images of the card can be found here if you are interested.



I hope you enjoy these ones an look forward to seeing your creations.

Love,

Jo.

Wednesday, 9 September 2009

Curious about the coming CRAFT Challenge?

Hello everyone!

As you may well be aware, challenge 16 at CRAFT Challenge will go live around 9am tomorrow morning (UK time).

For those of you who would like a sneak preview, here it goes. Here are some little peeks of my DT entry for challenge 16 at CRAFT Challenge. The full one will go live tomorrow and there will be some step-by-step 3D images and backgrounds for this project included in my post tomorrow, so keep an eye out. They are free to use for personal use, do not sell on or show them off as your own.

This week the sponsor is expected to be Flutterby Crafts banner , we are however still awaiting confirmation of the prize though. Don't worry, even if they have to pass us by, there will be a prize available for this challenge, so do join us.

As for the sneak previews, here they are:

Photobucket

Photobucket

Photobucket

Do come and have a closer look tomorrow! Looking forward to seeing your creations!

Love,

Jo.

Friday, 4 September 2009

Another award to share.

And here is another award to share with you. This one was also given to me by Debs as long ago as May! Not all that good at finding time to sort the awards out, I'm afraid. Just too busy with work, house and crafting. Need to get my sleep in somewhere as well, LOL.







Well, here is the second one she gave me. I would like to share this one with the following crafters, who are very talented and inspiring:







1. Tracy



2. Cathy



3. Ann



4. Carlyann



5. Tracy

Hope it's one you haven't got yet.

Do share them around and enjoy!

Love,

Jo.

Some awards to share, first one of several

Hello everyone,

I recently was told by someone that I always update my blog so well. Well, ummm............, not so sure to be honest.

Over the last few months I have had several blog awards, that I just did not have time to put on here and share. Not sure how everyone else with jobs, families and a great hobby of creating really manages it!

So, to make a start, here is the first one to share. This one was given to me by the lovely Debs. She left me this award as well as a second one at the same time in May and a third one this week! How fab is that?


It has to be passed on to some lovely bloggers. Difficult who those could be as there are far too many of those about!

So, let's have a think.....

I would like to pass this one on to the following very talented and inspiring bloggers:

1. Andrea

2. Gina


3. June


4. Jak Heath (the lady behind the Flippin' range)


5. Anesha

Please pass them on to some others that you feel deserve them as well. I hope you have not already got these awards, but it's the thought that counts, right?

All the people above have got some great work on their blog, do go over and have a look.

Have a good weekend all!


Love,





Jo.

Thursday, 3 September 2009

Challenge 15 at CRAFT Challenge, anything but a card.

Hello everyone,

Doesn't time just fly? It's time for challenge 15 already this week at CRAFT Challenge and we have something different for you in store this time. This week we want you to make anything but a card.

Can't wait to see what you all come up with.

For this week I have kept a project that I made early summer. Just kept it behind to use now. I made some candles for the craft fair at school (none sold I'm afraid, so they'll be fine for birthday presents I guess). Hope you like them.














This is a candle I made using a stamp from the Crafty Pad 'Belinda's Garden', I really love this one and hope you agree. This is the one I'm using as my DT entry for CRAFT Challenge.


I also made another few candles, this one has a stamp of 3 hens from Penny Black and is also quite nice and I also made some others with a bird stamp and some frog ones as well as a fairy one. Hope you like them.




















































Thanks for looking, all comments very welcome and much appreciated as always. If you would like to know how to do the candles, why not have a look at this thread on Trimcraft that is discussing this exact thing.


You can even print off a favourite photo onto tissue paper and use this for a very special personalised candle. I have tried it before. I have just added those pictures here. It was a candle I made as a Christmas present for my in-laws last Christmas with our kids on it. This was however the first one I made and not very successful yet. (I think the ink was nearly out on the printer)


This week's challenge is sponsored by Donnas Den banner She is donating LLB DVD and papers. The pictures are below.

Prize challenge 15 Photobucket Prize challenge 15


Have a good weekend, looking forward to seeing your creations and good luck!


Love,


Jo.

Saturday, 29 August 2009

Starwars birthday card

Good evening all,


This is a card I made for a friend of my 10-year old son today, who is mad about starwars. I'm fairly sure he'll like it. My son called it 'awesome', but that could have been to get rid of me as he was playing on the playstation LOL.
I used some starwars background figures, added a scalloped rectangle, and added a 3D image from 'clonewars' as that is the most recent version, I'm told. (just printed 6 for 6 different layers.

Hope you like it. All comments are very welcome and much appreciated.













Love,



Jo.

Thursday, 27 August 2009

CRAFT Challenge 14, embossing.

Hello everyone,


Rather wet and windy here at the moment, hope you all have a bit better weather. I'm not as busy as last week, but still catching up with work both at work and at home, while also playing hostess to the in-laws who are baby sitting our kids for the last few weeks of the holidays (great to have them about). They are due to go back home at the end of next week.


This week is challenge 14 at CRAFT Challenge already, the brief is 'embossing'.





I have made a very simple card this time. Embossed the base card with flowers (using big shot), added a scalloped circle cut with nestibilities out of earlier flower embossed card, and then put a circle cut with nestibilities on top with a fairy stamped image (free with a recent Papercraft Inspirations magazine, some of you may recognise it) and coloured it in with whispers pens, added some sticky gems for the hair decoration.





Then I stamped the Happy Birthday sentiment and heat embossed this using some red embossing powder. Cut out the sentiment and added with some pieces of ribbon to the card and it was done.





I will try to do something better for the next challenges, already prepared one for next time, (no sorry, you'll have to wait), but the time after will be a bit more elaborate as I'm planning it to be a card for my youngest birthday in the middle of September. Got some ideas already.












Hope you like it and the weather improves for this weekend.






This week is sponsored by: Just Tracy banner and is an undecorated tabbed journal. Prize CRAFT Challenge 14, embossing, supplied by Just Tracy It's definitely worth joining in, I think.

Thank you for looking, all comments very welcome and much appreciated.

Love,

Jo.



Sunday, 23 August 2009

CRAFT Challenge 13, inspiration picture.

Hello everyone, I'm back of holidays.



I first spent nearly a week at my in-laws while picking up our kids, which was great. Then we went for a lovely week in Scotland. We went just north of Inverness and on one of the days, we spent a lovely day at the beach.



This was great for the inspiration challenge at CRAFT Challenge. I had been thinking that it might be a good idea to decorate or make a picture frame using shells collected on the beach. Hope you agree. I was lucky enough to find a discounted picture frame at LIDL's when we got back as I felt this one was just perfect to use. I just haven't had a chance yet to get the pictures I made on the beach onto my computer and printed off to put in the 3 spaces. These pictures are the ones that came with the frame, not my family pictures. Good thing as well, as I like our privacy.



Hope you are all well and will be joining us again at CRAFT Challenge this week.



















Thank you for looking, all comments very welcome and much appreciated as always.


Love,


Jo.