Saturday, 19 September 2009

Sheffield Wednesday birthday card.

Hello everyone,


Hope you are all enjoying the weekend.


Over here the birthday season has started again! Party invitations are arriving once more and parties to go to. My youngest has his birthday today (7 already) and had a party to go to today as well for one of his friends.



This is a Sheffield Wednesday birthday card for one of my youngest's class mates. He's a big fan.


I quickly put this card together this morning, just in time before the party.


It is a card with a moving ball, revealing 'Goal' as a message. (using a penny slider system)

And here is how I made the card.

First I found an image on the net to use for 3D adaptation. You can find the step-by-step 3D image here (this time only 4 layers). The image is not my own, but I have edited it to form a 3D image.

The next step was to put the image together using sillicone glue as you can see here:








The next step was to get a square piece of green handmade paper, cut a piece of sturdy card slightly smaller than this and attach it to the back of the handmade paper.





















The next step was to cut out a football shape, cut out some sturdy card slightly smaller than the football to strengthen this shape and stick them together as well as cutting out 2 one pence sized circles stuck together again to be the counter part of the penny slider system.




Following this I made the goal, 3 strips of white handmade paper stuck together (7mm wide and 3 (3.5 for horizontal one)cm long.



Then stuck this to the green handmade paper top left corner.

I next put the footballer and the ball on top of the card to measure where I wanted the football to start and end and marked the slit for the penny slider on the handmade paper.

After this this was cut out.

The football was turned upside down and a very thin strip of doublesided foamtape was attached to the back, thin enough to fit comfortably in the slit in the card. The card with handmade paper was put on top of this upside down, with the foamtape sticking through. The penny sized circle was then attached to this and I doublechecked the slit was wide enough over the full length.


Next I got a piece of stiff card and held it in place to the back,
ball in lowest position, to fit comfortably onto the penny. I marked this point and then marked another line about 1cm higher. Then cut the card to size and fitted the words 'pull here' at the very top.

Time to then stick this card on the bottom of the pennyslider with doublesided sticky tape. I next moved the ball to the top position and in this position added the word 'GOAL' to it just above the edge of the handmade paper.


Now attach some doublesided foampads to the back of the handmade paper and attach to the base card (making sure the pennyslider can move freely)and add the footballer.


Add the Happy Birthday sentiment and done!


Hope you like it.



Thank you for looking.



All comments are very much appreciated and very welcome.



Love,



Jo.

Thursday, 17 September 2009

CRAFT Challenge 17,Colour combo pink and brown.

Good morning all,

It's time for Challenge 17 at CRAFT Challenge this week. You can see my DT entry next to this. One of my first Christmas cards this year. You can see how I made it below.

This challenge is sponsored by Just Tracy banner , who will be putting the prize up for this challenge. She is offering these lovely prizes for the winner of this week's challenge (drawn by random organiser):




prize17,1prize17,2prize17,3prize17,4prize17,5

To make the card you will need a square pink card (13.5x13.5 cm).

Next print of some lovely free backing paper from the 'Merry Christmas Everyone' range from Funky Fairies, cut them to size (10x10cm pink and 10x3.5cm brown) and attach the brown on top of the pink.





Stick this piece of backing paper to the square card:

Stamp the lovely Teddy on ball stamp from The Crafty Pad on some pink holographic paper and carefully cut it out.



Then also stamp it onto some brown handmade paper and cut it out.



Following that also cut off the ball of the picture.


Stick the brown bear on top of the holographic picture and you get the image above.

Then stick it onto some of the pink backingpaper cut out to a circle with nestibilities.



Add a brown rectangle and add the circle to get the next picture.



Add some sparkly stars and the card is nearly finished. Now all that is needed is the sentiment (this time I made it: Teddy found it hard work to decorate the Christmas Tree) printed onto pink rectangle of card, layer onto a rectangle of holographic silver paper with stars and add to the card.


Done!
Hope you like the card. I love it. I'm also going to enter it in 2 other challenges as well as it being my DT entry for CRAFT Challenge.
1. The Crafty Pad where the challenge this week is to Let's see some Christmas sparkle and ribbon.
2. Allsorts Challenge from which I used the sketch.
Thank you for looking, all comments are very welcome and much appreciated. Hope you are all well and will be joining us in this pink and brown challenge.
Love,
Jo.

Wednesday, 16 September 2009

Whiff of Joy blog candy.

Hi everyone,

Just wanted to let you know of some lovely Whiff of Joy candy that is on offer.

You can find some here:

Rachel's candy which is untill 19th of September

Jacqui which runs till 20th of September

Fran which ends tonight.

I have entered into these as the things on offer are brilliant (gorgeous stamps for one)

Love,

Jo.

Thursday, 10 September 2009

Craft Challenge 16, child for a child with removable item.

Doesn't time pass quickly? I just can't believe that we are already down to challenge 16 at CRAFT Challenge. This time we want you to make a card for a child with a removable item.

This week is sponsored by Hope Jacare. This weeks prize is to choose any 5 digi stamps from Claire's shop, which you can find at Hope Jacare at Shop Handmade. Claire is part of our design team and a very talented lady indeed who does some really lovely 'doodles'.


It is also nearly time for my youngest 7th birthday already! It seems like it was only yesterday I had him. Time really does fly.

Several months ago I made a card for one of his friends and he had requested a Ben10 card for him at the time. Some time later he said (when I asked him what he wanted for his birthday, meaning a present) that he wanted a Ben10 card as well, but a different one.


I felt this request fitted in with this challenge (timing as well as it's his birthday in about a week) very well.

So, here is the card. I will do a different post with the 3D images and backgrounds I used for this card. This way you are able to use some of these for your personal use as well if you like them.

There are some more images of the card below.

The item sticking out and lying in front of the card is a bookmark. You can just see the bottom of the bookmark where I have personalised it by adding my son's name.





If you would like to know how to put a springy card together, have a look here where I have put some instructions for one previously. This card is basically using a penny slider system on all 3D alien images. The 3D Ben10 is stuck onto double thickness foam pads to allow the other images to move underneath.

The instructions for this card can be found here and the background and step-by-step 3D images can be found here if you are interested.




Hope you like it. It was not an easy one to put together, but great fun now it is ready.

Looking forward to seeing your interpretations of this challenge. I will also be looking for some blog awards to hand around, so you might get lucky there!


Love,


Jo.

Instructions for my CRAFT Challenge 16 card.





As promised, here are also the instructions for making this card. About time as well, I guess as it has been a long time since I put any instructions on here.



First of all, start with making the basic springy card. You can find the instructions on how to do this here.




Then print of the backing papers (see post below) and the step-by-step 3D images that are also in the post below.
Further images of this card can be found here and the background and step-by-step 3D images can be found here if you are interested.




Stick the first backing paper onto the square area of the springy card.




It will then look as below.









Make a slit in the top of the card to allow a penny slider system for one of the Ben10 aliens to move in. I have used the flying one.




Next assemble the 3D images with silicone glue or sticky pads, they will then look similar to what is shown below.























Use a penny slider system to attach the flying Ben10 alien to the base card. It should then be similar to that. You could attach some ribbon as I have done to have a handle to move them with.







Next get the other square and make some slits in that to make penny sliders for the other Ben10 aliens. Make sure you do allow enough space for Ben1o to be mounted onto that as well.





Next attach all the aliens to the penny sliders, together with the ribbons. Attach a Happy Birthday sentiment to a rectangular piece of card that is attached to the under surface of one of the penny slider systems, so it will be revealed when the alien is moved. I have used the left hand corner one for this.




Attach Ben10 to the card as well with sticky foampads (I have used 2 to each spot to give more space for the aliens to move underneath) in such a way that the aliens can still move. This bit is quite tricky.




Turn this piece of card over and put sticky foam pads to the back in such a way that the penny sliders can move freely, there is sufficient space for the bookmark to rest (use this one as a guide by putting it in place when applying the foampads) and the flying alien will still be able to move freely as well when the card is put together.




Done!! That was quite some job!




But I hope you agree it was worth the result.




Here are some of the views of the card again as it is when fully assembled.





Thank you for looking, all comments are very welcome and much appreciated as always.




Love,




Jo.